Pedders 1.5 Inch Suspension Lift Kit - Nissan Navara D23 / NP300 - by Pedders, fits models listed.
This suspension lift kit is designed to raise the Nissan Navara by approximately 35mm, improving ground clearance and vehicle appearance. It is suitable for users seeking better clearance for off-road use and to accommodate larger tyres.
Fits: Nissan Navara D23 / NP300
Our Kit Contains:
- 2x 280129 - Pedders Trakryder Coil Spring
- 2x 290076 - Pedders Trakryder Coil Spring
- 2x 151238 - Pedders Trakryder Foam Cell Shock
- 2x 154307 - Trakryder Foam Cell Spring Seat
Below is a list of the kits and the purpose they are best suited to. If you are still not sure which kit to choose, or have further questions, please get in touch with our team for assistance:
- 803255 Pedders Heavy Duty Load Carrying & Towing Kit: Ideal for vehicles operated unladen or moderately laden (without canopy/tow bar). Uses uprated progressive springs (approx. 30-35mm lift) to maintain comfort in all conditions.
- 803278 Pedders Extra Heavy Duty Load Carrying & Towing Kit: Best for vehicles with a canopy and tow bar. Features slightly stronger springs (approx. 30-35mm lift) while retaining good ride quality when unladen.
- 803284 Pedders Super Heavy Duty Load Carrying & Towing Kit: Specifically for permanently laden vehicles. Requires a constant minimum 300kg load at all times. Note: ride will be very firm if the vehicle is unladen.
- 803258 Pedders Heavy Duty Variable Load Suspension Kit: Includes an airbag kit and shocks. Retains standard springs, so height and comfort are unchanged when unladen. Bags can be inflated when carrying significant occasional loads.
- 803259 Pedders Extra Heavy Duty Variable Load Suspension Kit: Combines uprated springs (approx. 30-35mm lift) with an airbag kit. Perfect for extreme use: from completely unladen to very heavily loaded.
Product Overview This Premium Lift Kit replaces original suspension components with upgraded parts including Pedders TrakRyder shocks, front coil springs, and new rear leaf springs. The kit raises the vehicle around 35mm, enhancing ground clearance for off-road conditions and allowing fitment of larger tyres while improving overall vehicle stance. The kit is suitable for both daily driving and off-road usage. Users regularly carrying heavy loads or towing trailers should contact Pedders for suitable rear spring substitutions. The components install directly without additional modifications.
Fitting Tip - Only torque suspension bushes when the weight is back down on the vehicle - NOT when the suspension is hanging down. Always ensure your front wheel alignment and geometry is checked after installation. Note: The kit components replace original items with all required bushes and U bolts included for installation. No other vehicle modifications are necessary. Ride heights should be measured as shown in official documentation. Variance may occur with accessory fitment or alternative spring rates.
The Shock Tech:
The kit features sintered iron piston shocks with a large 40mm bore, optimising damping and durability. Premium grade steel coils provide reliable lift and performance. Rear leaf springs and necessary hardware are included to ensure full suspension system integrity and compatibility.
- 1.5 Inch Lift Kit (approx. 35mm lift front and rear)
- Increased Off-Road Ground Clearance
- Sintered Iron Piston Shocks with Large 40mm Bore
- Premium Grade Steel Coil Springs
- Includes new rear leaf springs, bushes, and U bolts
- Front lift: approximately 35mm higher than standard
- Rear lift: approximately 35mm higher than standard
- Fitment: Nissan Navara standard vehicle
- 2 Year / 40,000km / 25,000 mile warranty
Delivery & Dispatch:
Upgrade your Navara with high-quality Pedders Suspension from Apex4WD – order now!
PLEASE USE A QUALIFIED MECHANIC TO FIT THIS PRODUCT IF YOU ARE NOT CONFIDENT IN YOUR OWN ABILITY.
